三分pk拾

封缄胶带涂布机

News classification

Contact us

Contact person: Mr。 Zhao (person in charge)

Telephone (fax): 0579-85326355

Mobile phone: 15857909991

QQ: 1310141668

Address:Yiwu, Zhejiang Province

Zip code: 322000

Website: www.sxrentaojx.com


How to Operate and Maintain Pipe Machine

Your current location: Home page >> News >> Company news

How to Operate and Maintain Pipe Machine

Date of release:2018-09-28 Author: Click:

First of all, we should pay attention to some things in operation to ensure the normal use of paper tube machines.

1. When cutting low, we use a ventilation machine to cut paper. The height of the cut paper should not exceed 125 mm, and according to the need, it should be tightened by pressing iron. Pipe machine can only cut paper, do not cut other materials. When working, do not reach under the iron and blade to prevent cutting. The special paper cutter can not reach into the rotating mandrel to prevent injury.

2. When grinding edges, we should always pay attention to the roll of trousers feet into the Paper-Loading ground axle to prevent injury or damage to the machine.

3。 When adjusting machine tools, attention should be paid to the grinder of abrasive wheel to prevent injury。

Secondly, besides the relevant prevention during operation, the paper pipe machine should also be maintained.

1. Equipment must be in the sole responsibility of the individual, forbidding others to move.

2。 The person in charge should inspect every part of the machine at any time whether workers, cards, measuring tools and other sundries have been placed in it, and take them away in time if found。

3. Staff members should not leave their jobs at will to ensure the safe and normal operation of the machine. If they need to leave, they should be cared for by others (staff of the same type of work).

4. Ensure the stability of the working voltage, and do not let the click burn out.

5. Check all the parts in the interior regularly, observe the consumption degree, and replace all the parts with serious wear and tear. The reassembly should be measured with a level ruler, and the unevenness of the pump should be adjusted, and the coaxiality of the coupling should be checked and adjusted.


The address of this article:http://www.sxrentaojx.com/en/news/396.html

Key word:

Recently browse:

分享 一键分享
Please leave a message for us
Please input the message here, and we will contact you as soon as possible.
Full name
Contacts
Telephone
Seat / mobile
mailbox
mailbox
address
address
欢乐棋牌 欢乐棋牌 欢乐棋牌 甘肃快3 北京赛车pk拾论坛 欢乐棋牌 欢乐棋牌 甘肃快3走势图 欢乐棋牌 甘肃快3