Contact person: Mr. Zhao (person in charge)
Telephone (fax): 0579-85326355
三分pk拾Mobile phone: 15857909991
Address:Yiwu, Zhejiang Province
Zip code: 322000
I. Safety Operational Matters
Only the correct operation can ensure the safety and stability of the production and manufacture of the automatic pipe cutter. Before the operation of the automatic pipe cutter, we should pay attention to the following safety operation precautions:
三分pk拾1。 The safety device equipped with the automatic pipe cutter must be used, and the disassembly of safety decoration must not be allowed。
2。 It is forbidden to adjust, measure and clean the parts directly by hand during the operation of the automatic pipe cutter。 If the pipe cutter must be adjusted, it must be carried out after the power failure of the whole machine stops running。
3。 All kinds of tools and components used by pipe cutters should be fixed and fastened to avoid loosening。
4. Operators should keep on-the-job during the operation of the automatic paper tube cutting machine (fault detection and timely treatment);
5. After the end of the whole paper tube manufacturing process, the site should be cleaned up to ensure that the defect to be used is thoroughly clear and deviated.
1. The large screen display device is used in the automatic pipe cutting machine to make the operation more convenient.
2. Cutting speed block (the cutting time of each knife is less than 0.5 seconds);
三分pk拾3。 The use of high-quality PLC programmable control software makes the operation of automatic pipe cutting machine more convenient。
4. Besides the function of tube cutting, it also has the functions of automatic counting, clamping and stopping.
5. The automatic pipe-cutting machine can operate completely automatically without manual fault detection. Once the alarm signal is detected, the sound and light alarm signal will be sent out to people immediately (characteristic people can handle and solve it manually in time).