Contact person: Mr。 Zhao (person in charge)
Telephone (fax): 0579-85326355
Mobile phone: 15857909991
三分pk拾Address:Yiwu, Zhejiang Province
Zip code: 322000
The cutter of suction packer is the most easily damaged part after use。 With the increase of production, it can not be effectively cut off between sealing pockets because of wear and tear for a period of time。 It needs to be adjusted and replaced。 How to replace and adjust such parts? Here is the introduction of replacement work and parts that need to be adjusted。
1. Release the handle to separate the meshing and extruding sealing and cutting wheels.
2. Remove old cutters and replace them with new ones.
三分pk拾3。 Adjust the position of the cutting wheel so that the blades are exactly relative, and the installation height of the blades should be appropriate。 While the sealing and cutting gears mesh, the blades and the cutting blades should be effectively contacted, so that no gap can be left up and down。
4. Adjust the clearance between the sealing wheel according to the thickness of paper or film, so that the blade can cut the paper or film without wrinkling.