Contact person: Mr. Zhao (person in charge)
Telephone (fax): 0579-85326355
Mobile phone: 15857909991
Address:Yiwu, Zhejiang Province
三分pk拾Zip code: 322000
三分pk拾After a long period of use, there will always be some wear and contamination in the automatic paper pipette cutter, which will lead to the performance degradation of the product, so that the surface of the importance of maintenance work, but many customers do not know the correct maintenance methods. Then this article will introduce you:
1。 Open the automatic pipe cutter and remove all the rust-proof agents, rust and other substances applied on the internal parts。 Then clean all the parts once and then use the equipment to quickly dry and reinstall the parts。
2. After cleaning all the parts inside the automatic pipe cutter, it is lubricated. The lubricant added inside the automatic pipe cutter is not optional. The lubricant recommended by the manufacturer of the automatic pipe cutter can be used to add it. If you want to add your own lubricant, you must carry out tests to confirm that there are no problems before adding it.
Before adding the lubricant to the automatic pipe cutter, it needs to be filtered once. When the amount of lubricant added reaches the prescribed position of the manufacturer, it can run the action parts again to fill all the lubricants with parts.
The above content is to maintain the method of automatic pipe cutting machine, this product can be maintained and cleaned to improve the performance of equipment, and good maintenance can also reduce the probability of failure。 It can be seen that the maintenance of any equipment is indispensable。