Contact person: Mr. Zhao (person in charge)
三分pk拾Telephone (fax): 0579-85326355
Mobile phone: 15857909991
Address:Yiwu, Zhejiang Province
Zip code: 322000
Pipe suction machine is a widely used paper tube mechanical equipment nowadays. It is inevitable that there will be some wear and tear in the process of long-term use. So how to keep the equipment running steadily while prolonging the service life of the equipment has always been a problem that everyone is considering.
Secondly, it is a very simple thing to prolong the service life of the suction pipe machine. In addition to the correct operation according to the standards and requirements in the daily operation of the equipment, it can also clean and maintain the equipment, so as to improve the service life of the equipment.
I. Use Inspection
Before operating the suction pipe machine, it is necessary to check the various parts of the equipment in detail, including whether the switch is in good condition, whether the line is insulated, whether the fasteners such as screw are in tight condition, whether the protective device is installed and used correctly, all of which need to be considered and checked. Only when all the components are confirmed to be normal, can they be checked. Can carry on the follow-up operation to the equipment.
2. Correct Use
Pipette machine This equipment must be the responsibility of a special operator, that is, a pipette machine is generally operated by a fixed staff, can not be moved at will, in the process of operation, strictly prohibit the hand into the equipment, there will be very dangerous situation. In addition, if there are some faults in the operation of the equipment, it is necessary to stop the operation of the equipment in time, and it is strictly prohibited to let the equipment run with faults.
3。 Clean operation
After each operation of the suction pipe machine, it is necessary for the operator to clean up the impurities in the equipment and the surrounding environment。 Of course, this is far from enough。 In addition to these, every time we reuse a suction pipe machine, we need to open the box to check the equipment, clean up some residual iron scraps, some rust inhibitors and dust accumulated in the storage process, after all cleaning up, we can carry out the next operation。
三分pk拾IV. Lubrication Operation
After the operators finish the operation of the suction pipe machine and clean the interior, the equipment can be lubricated and refueled to make the interior of the equipment smooth。 Of course, the use of lubricating oil has a certain standard。 It must be confirmed that the required lubricating oil can be added to the equipment after testing。 The lubricant is filtered and then added to the position of the oil mark, so as to ensure that the subsequent suction machine equipment is very handy in use。
These are the four ways to extend the service life of pipette equipment. As long as these four works are done well, the stability of the equipment in operation can be ensured and the service life can be longer.