Contact person: Mr。 Zhao (person in charge)
Telephone (fax): 0579-85326355
Mobile phone: 15857909991
Address:Yiwu, Zhejiang Province
Zip code: 322000
At present, the market has reached a very high level of attention to product packaging. At present, reasonable packaging of all products is an inevitable trend. Relatively speaking, the packaging industry is becoming more and more demanding, and paper straw machinery is also constantly developing.
This article mainly explains some operating specifications of paper suction pipe machine in the operation process. I hope that after you have finished reading, you can operate the equipment reasonably in the future to ensure safe and stable operation.
1. Wear the right clothes
When operating the paper straw machine, the operator must wear it correctly, that is to say, the wearer must wear it correctly, and the wearer must be removed before operating the mechanical equipment。
Secondly, it mainly consists of two parts: headgear and gloves. Head cover is required to be worn by operators when operating paper straw machinery. Otherwise, if you look at some operators with too long hair, you may slightly accidentally twist the hair in the process of equipment operation, causing a dangerous situation.
Gloves, on the contrary, are strictly forbidden to be worn by operators, because once gloves are carried, gloves may be twisted into the mechanical interior during operation, resulting in hand cramps.
II。 Boot-up Inspection
三分pk拾The paper suction pipe machine must be strictly inspected before operation, that is to say, the fasteners on the mechanical equipment should be confirmed one by one, and some fasteners which are loosened because of the previous vibration should be re-tightened。 Then confirm the normal situation, let the equipment run empty for about 2 minutes, if there is no failure, the equipment can be put into normal use。
3. Failure situation
三分pk拾If the paper suction pipe machine fails in the operation process, it must stop the operation of the equipment immediately, remember that the equipment can not run with fault, can not be used on the spot, it is very easy to appear some dangerous situations. After the equipment stops running, we can adjust the equipment. Of course, we can't use the hand to adjust it. Instead, we need to use some tools to clean up some impurities inside and reinforce some parts. Or if some parts are damaged, we need to do timely replacement.
IV. Equipment Management
Paper straw machines must be handled by specially equipped personnel。 Others are strictly prohibited from operating or misappropriating the equipment。 In addition, in the process of running the equipment, staff can not leave their posts。 They should observe the operation of the equipment to ensure that the equipment works steadily and normally throughout the process。 Otherwise, if they leave privately and the problems are not dealt with, they will cause very serious consequences。 After the equipment is finished, it is necessary to turn off the power supply of the equipment first, then take out the workpieces and cutters one by one, place them neatly, and clean the equipment interior and surrounding environment properly。
Of course, the most important thing is that the mechanical safety device inside the paper suction machine must be used correctly according to the regulations. No one can take it apart to save time and convenience.
These are the four rules for the operation of paper straw machinery. I hope you will pay attention to this equipment in the future, to ensure personal safety and property safety in the use of equipment, while keeping the equipment running efficiently and steadily.