Contact person: Mr。 Zhao (person in charge)
Telephone (fax): 0579-85326355
Mobile phone: 15857909991
Address:Yiwu, Zhejiang Province
Zip code: 322000
Pipette machine is also a kind of paper pipe mechanical equipment which is widely used nowadays. This paper mainly analyses some common faults in the use of pipette machine, and explains the reasons for the faults and the ways to eliminate them, so as to help you use the pipette machine more reasonably in the future.
三分pk拾I. The helix inside the paper suction pipe is very uneven.
The emergence of this kind of situation is mainly caused by the following aspects, such as the resistance caused by the cutting blade inside the suction pipe machine is too large in the operation process, at this time we only need to adjust the blade accordingly, and reduce the resistance appropriately.
三分pk拾Of course, it is also possible that when the first layer of paper tape is coated with lubricant, the amount of lubricant is less, or the application is very uneven。 At this time, we need to re-coat the first layer of paper tape with lubricant to ensure that the application is uniform, so in general, when we first coat the paper tape with lubricant, we should moisten it。 The amount of slipper is evenly applied after proper selection, which will be relatively convenient in the subsequent product production process。
2。 The surface of the paper tube produced is uneven。
This is mostly due to the asymmetry of the winding angle of the two belts in the suction machine, which results in the one-way compression of the paper tube during the operation of the equipment, resulting in the uneven surface of the paper suction tube produced subsequently. We only need to adjust the winding angle of the inner belt through the handwheel.
3。 Non-uniform distribution of binders on paper tubes
If there is no right angle between the internal scraper and the tape or some magazines on the scraper, it will cause uneven application of adhesive on the paper tube。 So in general, after the operation of our team's equipment, we need to clean the interior, clean the magazines including the scraper and some other parts, let the equipment into the corresponding operation, and then in the process of operation, if there are some uneven application of binder, we will adjust the angle between the scraper and the tape, as well as the scraper properly。 The angle of the knife edge keeps it at a right angle, so that the equipment can be effectively used for stable paper pipette production。 4。 Too long or too short cutting time for paper tube
Generally, in the process of producing paper pipette, the time of cutting paper pipette is kept at a fixed value, so if the cutting time is too long or too short, it means that there may be some problems in the equipment. At this time, we need to adjust the equipment accordingly, adjust the cutting time, so that it can be kept in the paper pipette turning time.
Above are some troubleshooting methods provided by Gaoda Machinery for the suction machine during operation。 I hope it will be helpful for you to operate this equipment in the future。 Of course, if you want to know more about this equipment, you are welcome to visit the website of Gaoda Machinery for viewing and inquiring。 I believe it will certainly help you。 They are helpful。